-
Specifically designed for primary demolition, the PD range is the best dedicated solution for standard and high reach demolition machines. Engineered with two cylinders, two pivot points, big jaws opening with high closing forces to the material is the right tool to be used for demolishing thickest reinforced concrete, such as bridges, viaducts, heavy foundations, and quaysides. -
Specifically designed for primary demolition performances, the HP range is the best suggested tool for excavator with high reach arm with operative elevation over 20 m. Engineered with one cylinder, two pivot points, big jaws opening with a constant closing forces to carry out specialised demolitions of artefacts and structures of high elevation. -
The VF Fixed Pulveriser Series is an excellent choice for recyclers who need to pre-crush and prepare concrete created during building demolition for fine crushing. Designed for secondary demolition. Concrete chunks produced during demolition can be fine-crushed at the job site. Concrete is separated from rebar and reduced for saving volume, dumping and transportation costs. -
The VF Fixed Pulveriser Series is an excellent choice for recyclers who need to pre-crush and prepare concrete created during building demolition for fine crushing. Designed for secondary demolition. Concrete chunks produced during demolition can be fine-crushed at the job site. Concrete is separated from rebar and reduced for saving volume, dumping and transportation costs. -
Engineered on the basis of the fixed pulveriser, in addition to its specific characteristics, the VF HM is equipped with a high-power magnet operated by its integrated hydraulic power drive unit. Optimizing secondary demolition on a site has never been easier.
-
Thanks to their particularly solid design and different available jaw types, the MD Grapple Series is well suited for demolition of brick and wood structures. These grapples are extremely effective for sorting and loading a variety of different materials as found in demolition debris, waste and recycling operations. -
The RV Series is designed to increase your timber handling productivity. Mainly used in open country or on timber yards it is available for fixed mount use on excavator-based machines as well as for cranes, telescopic lifters, where large quantity of logs and round woods can be moved and transported. -
Are you looking to shear ferrous material Need to perform a demolition site Need to process lighter steel or non-ferrous material such as tires, cables, rebars, small beams and small diameter pipe light material Boom mount or stick mount, the CI- R Series has what it takes to perform well on your job site. -
The CK Multiprocessor consists of a universal body to which different demolition jaws kits are hooked. Thanks to an innovative release semi-automatic system you do not have to remove structural pins manually and can change the kit in 5 minutes. Available with Primary, Pulveriser, Combi, Swiss, Shear and Tank jaws. -
The MT Multiprocessors offers a versatile range of solutions suited for both primary and secondary demolition applications. This Multiprocessor consists of a main body, to which it is possible to mount different types of jaws transforming it into a dedicated attachment for your specific application: Demolition of structures, reduction and fragmentation of material up to the cutting of ferrous materials and wood. -
The SC is a multi-processor that can tackle all types of demolition, from Primary to Secondary and Selective (Strip out). It consists of a main body equipped with two cylinders to which different types of jaws can be fitted for the most diverse demolition activities, crushing, cutting, and recycling of concrete and steel structures and artefacts. The SC's versatility allows it to work on different types of materials, from the least resistant to the more tenacious, ensuring the maximum efficiency in terms of operation and working time. Its technology helps to reduce the environmental impact and increase the overall productivity of demolition operations. With the VTN SC, operators can work with greater safety, precision, and flexibility, reducing the use of auxiliary equipment. -
The CK Multiprocessor consists of a universal body to which different demolition jaws kits are hooked. Thanks to an innovative release semi-automatic system you do not have to remove structural pins manually and can change the kit in 5 minutes. Available with Primary, Pulveriser, Combi, Swiss, Shear and Tank jaws. -
The RP Series is a specific attachment developed for maintenance and modernization of railways and subways. Equipped with a special Heavy-Duty rotation and specific jaws mechanism, you can cut rails up to 70 Kg mass per meter (141 lb./yd.) and over depending in specific shape and resistance. -
The FP Rotating Pulveriser Series is designed to last long and have a high level of breaking forces to thrust through materials quickly. They are used for demolishing and recycling on job sites where noise pollution and vibrations cannot be tolerated. Its characteristics allow to handle a job site with the primary & secondary demolition phases with a single piece of equipment. -
The FP Rotating Pulveriser Series is designed to last long and have a high level of breaking forces to thrust through materials quickly. They are used for demolishing and recycling on job sites where noise pollution and vibrations cannot be tolerated. Its characteristics allow to handle a job site with the primary & secondary demolition phases with a single piece of equipment. -
The PM Series is designed for picking up and moving various materials. The special 3+2 teeth jaw configuration, the rugged construction, the huge opening & the high clamping force, make it the ideal attachment for heavy duty jobs where speed up operation and precision are required. Excellent performance with high durability. -
The SC series stump cutter is specially designed to extract the stump of a tree anchored to the ground from its roots. It reduces the size of the stump it has been removed and it guarantees its correct reuse for the subsequent processing phases (chipping, shredding, biomass, etc.). Suitable for any type of fitting size and variety of wood. -
Traditional manual methods of removing high value materials from end-of-life vehicles can be labour intensive and costly, in many cases making the process economically unviable. The VD series with its slim design allows for the dismantling & separation of all components from even the tightest areas of the vehicle allowing the natural recycling and disposal. -
The W Series range tree shears are the recommended tools for forest utility work, trimming limbs and trees for roadside, trails and railroad tracks maintenance, in hard-to-reach places as well as difficult slopes, steep cliffs or in fruit fields where cutting rates are more subject to tree spacing and operator skill.
CALL NOW ON 087 781 1632 TO GET A QUOTEAMAZING NEW PRODUCTS JUST ADDED
We regret to announce the untimely passing of Gary O’Shaughnessy, who was tragically involved in an accident. In light of this, we want to assure you that business operations will continue as usual. For any enquiries, please reach out to Robert O’Shaughnessy at 087 781 1632. Additionally, for matters related to accounts, please contact Declan Reidy at declanreidy@taxassist.ie or call +353 (0)86 791 6852.
Phone: +353 (0)87 781 1632
Web: aprdmachinery.com
TOP RATED PRODUCTS
© Copyright 2024 APRD Machinery Ltd.
