TerraStar® 
Screening Buckets
The TerraStar® Ecoline bucket was developed and built so that the advantages of the bucket can also be used in gardening and landscaping. Equipped with the patented Wolf shaft couplings for quick shaft changes directly at the construction site, the Ecoline is designed with various cutting widths for excavators from 1.6 tons. With the options of either 3 or 4 shafts, it is ideal for separating and mixing topsoil as well as building rubble. Damp soils pose no problems for the Ecoline, which is equipped with a highly efficient hydraulic motor. Save transport and landfill costs and use the available resources on site.
Areas of application of the screening bucket
- Smaller quantities on construction sites or in the storage area
- Backfilling of pipe and sewer trenches
- Mixing, screening and aerating soil and compost
Bucket equipment and extras
The Ecoline Buckets are suitable for excavators or wheel loaders. It includes maintenance-free shaft bearings and maintenance cover for the chains. Optionally available: shock valve, excavator and wheel loader connection combined, overflow protection to increase the volume.
A Knife width 500 mm
B Clearance height exit side 450 mm
C Depth 500 mm
E External dimension width 700 mm
F External dimension height 632 mm
G External dimension length 786 mm
Screen Shafts
| Specifications | |
|---|---|
| Excavator | from 1.6 t |
| Wheel Loader | from 1.8 t |
| Cutting Width | 500 mm |
| Number of Shafts | 3 pieces |
| Sieve Area | 0.25 m² |
| Content | 0.12 m² |
| Shaft Coupling | Options Available |
| Weight* | 200 kg |
| Drilling Pattern | LB2 |
* Weight without top plate – with corrugation kit, separation distance 15 mm. Tight separation distances lead to higher weight, further separation distances or mixing shafts lead to lighter weight
| Hydraulics | |
|---|---|
| Motor | 130 ccm |
| Oil Requirement** | 30 – 40 l |
| Leak Oil | not necessary |
| Torque max. | 255 / 352 Nm |
| Pressure max. | 200 bar |
| Speed max. | 350 / 470 rpm |
| Shock Valve | standard |
** Oil quantities deviating downwards reduce the speed of the shafts, resulting in a slower mode of operation
A Knife width 500 mm
B Clearance height exit side 570 mm
C Depth 500 mm
E External dimension width 700 mm
F External dimension height 751 mm
G External dimension length 808 mm
Screen Shafts
| Specifications | |
|---|---|
| Excavator | from 2.2 t |
| Wheel Loader | from 2 t |
| Cutting Width | 500 mm |
| Number of Shafts | 4 pieces |
| Sieve Area | 0.30 m² |
| Content | 0.15 m³ |
| Shaft Coupling | Options Available |
| Weight* | 250 kg |
| Drilling Pattern | LB2 |
* Weight without top plate – with corrugation kit, separation distance 15 mm. Tight separation distances lead to higher weight, further separation distances or mixing shafts lead to lighter weight
| Hydraulics | |
|---|---|
| Motor | 130 ccm |
| Oil Requirement** | 30 – 40 l |
| Leak Oil | not necessary |
| Torque max. | 255 / 352 Nm |
| Pressure max. | 200 bar |
| Speed max. | 350 / 470 rpm |
| Shock Valve | standard |
** Oil quantities deviating downwards reduce the speed of the shafts, resulting in a slower mode of operation
A Knife width 700 mm
B Clearance height exit side 570 mm
C Depth 500 mm
E External dimension width 700 mm
F External dimension height 751 mm
G External dimension length 808 mm
Screen Shafts
| Specifications | |
|---|---|
| Excavator | from 3 t |
| Wheel Loader | from 2.2 t |
| Cutting Width | 700 mm |
| Number of Shafts | 4 pieces |
| Sieve Area | 0.40 m² |
| Content | 0.20 m³ |
| Shaft Coupling | Options Available |
| Weight* | 290 kg |
| Drilling Pattern | LB2 |
* Weight without top plate – with corrugation kit, separation distance 15 mm. Tight separation distances lead to higher weight, further separation distances or mixing shafts lead to lighter weight
| Hydraulics | |
|---|---|
| Motor | 130 ccm |
| Oil Requirement** | 30 – 40 l |
| Leak Oil | not necessary |
| Torque max. | 255 / 352 Nm |
| Pressure max. | 200 bar |
| Speed max. | 350 / 470 rpm |
| Shock Valve | standard |
** Oil quantities deviating downwards reduce the speed of the shafts, resulting in a slower mode of operation
A. Knife width 800 mm
B. Clearance height exit side 590 mm
C. Inner dimension in the middle 750 mm
D. Clear height in the middle 630 mm
E. External dimension width 1065 mm
F. External dimension height 870 mm
G External dimension length 1100 mm
Screen Shafts – Mixing Shafts M80X- Block Disks
| Specifications | |
|---|---|
| Excavator | from 4.0 t |
| Wheel Loader | from 3.5 t |
| Cutting Width | 800 mm |
| Number of Shafts | 3 pieces |
| Sieve Area | 0.40 m² |
| Content | 0.30 m³ |
| Shaft Coupling | Options Available |
| Weight* | 400 kg |
| Drilling Pattern | LB2 |
* Weight without top plate – with corrugation kit, separation distance 15 mm. Tight separation distances lead to higher weight, further separation distances or mixing shafts lead to lighter weight
| Hydraulics | |
|---|---|
| Motor | 195 cc |
| Oil Requirement** | 50 – 60 l |
| Leak Oil | not necessary |
| Torque max. | 380 / 560 Nm |
| Pressure max. | 300 bar |
| Speed max. | 300 / 380 rpm |
| Shock Valve | optional |
** Oil quantities deviating downwards reduce the speed of the shafts, resulting in a slower mode of operation
A. Knife width 1000 mm
B. Clearance height exit side 590 mm
C. Inner dimension in the middle 750 mm
D. Clear height in the middle 630 mm
E. External dimension width 1065 mm
F. External dimension height 870 mm
G External dimension length 1100 mm
Screen Shafts – Mixing Shafts M80X- Block Disks
| Specifications | |
|---|---|
| Excavator | from 6 t |
| Wheel Loader | from 4 t |
| Cutting Width | 1000 mm |
| Number of Shafts | 3 pieces |
| Sieve Area | 0.60 m² |
| Content | 0.45 m³ |
| Shaft Coupling | Options Available |
| Weight* | 600 kg |
| Drilling Pattern | LB2 |
* Weight without top plate – with corrugation kit, separation distance 15 mm. Tight separation distances lead to higher weight, further separation distances or mixing shafts lead to lighter weight
| Hydraulics | |
|---|---|
| Motor | 195 cc |
| Oil Requirement** | 50 – 60 l |
| Leak Oil | not necessary |
| Torque max. | 380 / 560 Nm |
| Pressure max. | 300 bar |
| Speed max. | 300 / 380 rpm |
| Shock Valve | optional |
** Oil quantities deviating downwards reduce the speed of the shafts, resulting in a slower mode of operation
